GEFEN CAT muunnin - 4K Ultra HD HDBaseT Receiver w/ Audio De-Embedder and POH
Hinnat näkyvät vain verkkokauppaan kirjautuneille käyttäjille.
|
|
GEFEN CAT muunnin - 4K Ultra HD HDBaseT Receiver w/ Audio De-Embedder and POH
Tuotekoodi:
EXT-UHDA-HBTL-RX
4K Ultra HD HDBaseT Receiver w/ Audio De-Embedder and POH
|
4K Ultra HD HDBaseT Receiver w/ Audio De-Embedder and POH
EXT-UHDA-HBTL-RX
Extend HDMI with audio breakout up to 70 meters/230 feet, over a single CAT-5
The Gefen EXT-UHDA-HBTL-RX is a highperformance HDBaseT™ Receiver that can
extend HDMI up to 70 meters (230 feet) at
1080p and 40 meters (130 feet) at 4K, over a
single CAT-5e cable. It also de-embeds analog
L/R, TOSLINK® optical digital, and coaxial
digital audio from the video for use with a
separate audio system, enhancing the impact
of presentations. This Receiver uses Gefen’s
implementation of the HDBaseT™ technology
with enhanced functionality. It accommodates
10.2 Gbps of data throughput and 300 MHz
TMDS Clock frequency, and supports HDMI 2.0
resolutions up to 4K Cinema-DCI (4096 x 2160
to 30 Hz 4:4:4) and 4K Ultra HD (3860 x 2160
to 60 Hz, 4:2:0, or 30 Hz 4:4:4), with HDCP
2.2 or 1.4. Highest performance multichannel
digital audio including 7.1 channels of LPCM and
HBR (High Bit Rate) digital audio formats, such
as Dolby Atmos®, Dolby® TrueHD, DTS:X™,
and DTS-HD Master Audio™ are passed
through to the HDMI output. The EXT-UHDAHBTL-RX also extends RS-232 and 2-way IR
when used with a compatible Sender unit,
facilitating the control of A/V sources placed
near the Sender from the viewing location,
and sending commands from the head end to
control the display or another device placed
near the Receiver unit. It can also send RS-232
commands from a third-party controller placed
by the Receiver, for switching, scaler controls,
and EDID management of a compatible Sender
unit. Bi-Directional HDBaseT™ standard POH
(Power Over HDBaseT™) technology can
supply power remotely from the Receiver unit to
a compatible Sender unit, or it can pass power
from a compatible Sender unit to the Receiver,
using the same CAT-5 cable that extends the
HDMI signal. Only one of the two units will
need a power supply. This feature simplifies
installation in cases when an electrical outlet
may not be available near the source or the
display. The Receiver’s small, ultra-low-profile
enclosure can be securely surface-mounted and
conveniently hidden away from sight behind the
display. It also accommodates a Gefen locking
power supply plug for secure connection.
Features:
- Supports 300 MHz TMDS Clock and data throughput of up to 10.2 Gbps
- Extends HDMI, 2-way IR, and RS-232 over a single CAT-5e:
- 4K Ultra HD (3840 x 2160 @ 60 Hz, 4:2:0), up to 130 feet/40 meters (8-bit color)
- 4K Ultra HD (3840 x 2160 @ 30 Hz, 4:4:4), up to 130 feet/40 meters (8-bit color)
- 4K Cinema-DCI (4096 x 2160 @ 24 or 30 Hz 4:4:4), up to 130 feet/40 meters (8-bit color)
- 1080p Full HD (60 Hz) or WUXGA (1920x1200 @ 60 Hz), up to 230 feet/70 meters (up to 12-bit Deep Color)
- HDMI Features Supported:
- HDMI 2.0
- HDCP 2.2 and 1.4
- 12-bit Deep Color (at 1080p)
- LPCM 7.1, Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ pass-through
- 3DTV pass-through
- CEC pass-through
- Lip Sync pass-through
- RS-232 control of switching, scaler, and EDID management functions of a compatible Sender
- Bi-Directional RS-232 extension when used with a compatible Sender
- 2-way IR extension when used with a compatible Sender
- Digital (optical and coaxial) and Analog audio breakout
- Bi-Directional Power over HDBaseT™ (POH) provides power to the Receiver or a compatible Sender unit over the link cable - only one side will need external power
- Uses Gefen’s implementation of HDBaseT™ technology with enhanced features
- Field-updateable firmware via RS-232 and using the Gefen Syner-G™ software
- Locking power connector
- Compact, ultra-low-profile enclosure is surface-mountable and can be hidden away
Specifications:
- Maximum TMDS Clock: 300 MHz
- Total Signal Bandwidth/Data Rate: 10.2 Gbps
- Video Output Connector: (1) HDMI Type A 19-pin, female
- Link Connector: (1) RJ-45, shielded
- L/R Analog Audio Output port: (1) 3.5mm mini-stereo jack
- Optical Digital Audio Output port: (1) TOSLINK®
- Coaxial Digital Audio Output port: (1) RCA, female
- RS-232 port: (1) 3-pin Phoenix
- IR In/Ext port: (1) 3.5mm mini-stereo jack
- IR Out port: (1) 3.5mm mini-mono jack
- IR Extender type: EXT-RMT-EXTIRN
- Power Indicator LED: (1) Blue
- Link Indicator LED: (1) Green
- HDCP Indicator LED: (1) Green
- RS-232 Pass-Thru/Prog Switch: (1) 3-position, slide-type
- Power Supply: (1) 12V DC, locking, 5.5mm barrel/2.1mm pin
- Power Consumption:
- Not powering a Sender: 9W maximum
- Powering a Sender: 22W maximum
- Operating Temperature: +32 to +122 °F (0 to +50 °C)
- Operating Humidity: 5% to 90% RH, non-condensing
- Storage Temperature: -4 to +185 °F (-20 to +85 °C)
- Storage Humidity: 0% to 95% RH, non-condensing
- MTBF: 50000 hours
- Overall Dimensions (W x H x D, not including the connectors):
- Not including the mounting brackets: 6” x 0.65” x 4” (152mm x 17 x 100mm)
- Including the mounting brackets: 7” x 0.65” x 4” (178mm x 17 x 100mm)
- Net Weight: 0.6 lbs. (0.27 kg)
- Shipping Weight: TBD
Huomioi, että kuva on suuntaa-antava ja varsinainen tuote saattaa ulkoasultaan poiketa tuotekuvasta (esim. tietokoneisiin ei välttämättä sisälly näyttöä, vaikka kuvassa sellainen olisikin). Jos tuotenimikkeessä on eri tiedot kuin tuotekuvauksessa, tuotenimikkeen tieto on oikein. Jos jokin asia jää epäselväksi, lähetä sähköpostia tukeen ennen tuotteen tilaamista.