CYP SDVoE 18Gbps HDMI over fiber Transceiver Extender (HDMI, HDCP2.2, HDMI2.0) -
Hinnat näkyvät vain verkkokauppaan kirjautuneille käyttäjille.
|
|
CYP SDVoE 18Gbps HDMI over fiber Transceiver Extender (HDMI, HDCP2.2, HDMI2.0) -
|
SDV-FTRX SDVoE 4KUHD (6G) HDMI over Fiber Transceiver
SDV-FTRX
The SDV-FTRX is designed to transmit, 4KHDR (6G) signals over a 10G IP Fiber Network with almost zero latency.Every Transceiver can be configured to function as either a Transmitter or a Receiver, providing additional flexibility for any installation. Using a sophisticated ultra-light compression (lossless for most content) it’s the perfect solution for extending 4K HDR video (HDMI or DisplayPort) and data. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit color and multi-channel HD Bitstream audio can be transmitted in pass-through mode. The use of interchangeable, field replaceable, SFP+ modules allows for transmission distances of up to 30km (Maximum transmission distance depends on the SFP+ modules used). Multiple control and data signals may also be transmitted along with the audio and video, including IR, (RS-232 Future Development) USB (for KVM) and Ethernet.
Multiple Transceivers may be combined with one or more 10-Gigabit fiber Ethernet switches and the units can be used together to form a distributed video matrix, a multi-viewer system, or a video wall system adding to their flexibility in large event installations (Control Hardware Required). The built-in EDID and HDCP management offers additional installation flexibility. Basic configuration of the unit can be achieved via front panel buttons with an On-Screen Display (OSD). Advanced control requires optional control software and a LAN connection.
Features:
- HDMI 2.0 and DVI 1.0 compatible
- HDCP 2.2 and HDCP 1.x compliant
- Can be configured to function as either a Transmitter or a Receiver
- 1 HDMI and 1 DisplayPort input
- 1 HDMI output (Functions as local monitor output in Transmitter mode)
- 1 analog stereo jack (switchable between input/output mode)
- IP switchable with minimum latency (requires optional control center or control software)
- Ultra-light compression, lossless for most content
- Extension up to 30km (depending on the fiber module used)
- Independent breakaway A/V matrix switching (requires optional control center or control software)
- Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Genlock mode only)
- Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI or DisplayPort sources
- Analog stereo audio extension, insertion and extraction (insertion and extraction requires optional control center or control software)
- Bi-directional LAN, IR, RS-232 & USB 2.0 extension
- Signal transmission interfaces with 10-Gigabit Ethernet switches via XFI, IEEE 802.3ae, compatible SFP+ fiber modules
- Basic configuration via front panel buttons with an On-Screen Display (OSD)
Specifications:
Inputs
- 1x HDMI [1x HDMI Uncompressed AV and Data]
- 1x SFP + [1x RX Mode - SDVoE fiber LC/PC-LC/PC Duplex MM OM3]
- 1x 3.5mm Stereo mini-jack [1x TX mode - analogue Stereo(L/R)]
- 1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
- 1x Phoenix (3 pin) [1x Reserved for future use RS-232]
- 1x Display Port [1x Uncompressed AV]
- 1x RJ45 [1x GbE LAN Serving]
- 1x USB 3 Type B [1x Service Port Power & Data]
Outputs
- 1x HDMI [1x HDMI Uncompressed AV and Data]
- 1x SFP + [1x TX mode - SDVoE fiber LC/PC-LC/PC Duplex MM OM3]
- 1x 3.5mm Stereo mini-jack [1x RX mode - analogue Stereo(L/R)]
- 1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
PSU:
Dimensions
- 231mm [W] x 158mm [D] x 25mm [H]
Net Weight
Gross Weight
Huomioi, että kuva on suuntaa-antava ja varsinainen tuote saattaa ulkoasultaan poiketa tuotekuvasta (esim. tietokoneisiin ei välttämättä sisälly näyttöä, vaikka kuvassa sellainen olisikin). Jos tuotenimikkeessä on eri tiedot kuin tuotekuvauksessa, tuotenimikkeen tieto on oikein. Jos jokin asia jää epäselväksi, lähetä sähköpostia tukeen ennen tuotteen tilaamista.