CYP 4K UHD HDMI/DP/VGA/USB over HDBaseT Presentation Switcher with Trigger Control ( -
Hinnat näkyvät vain verkkokauppaan kirjautuneille käyttäjille.
|
|
CYP 4K UHD HDMI/DP/VGA/USB over HDBaseT Presentation Switcher with Trigger Control ( -
|
EL-2600V 4K UHD+ HDMI/DP/VGA/USB over HDBaseT Transmitter with Trigger Control
EL-2600V
The EL-2600V presentation switcher is designed for use in environments needing a wide range of flexibility when it comes to inputs, outputs, and control. The three most common video input interfaces (HDMI, DisplayPort, and VGA w/stereo audio) are included, providing the ultimate in source compatibility and flexibility. The HDMI and DisplayPort inputs support resolution/timing up to a maximum of 4K@60Hz (4:4:4, 8-bit) which is converted, when appropriate and necessary, for transmission over HDBaseT. The selected source (video & audio) can be transmitted over Cat.6/7 cable up to 100 meters (at 4K@60Hz) along with bidirectional Ethernet, RS-232, USB, and IR. Due to the matrixing capability of this unit, an independent source may also be selected for output over the local HDMI output. The EL-2600V also includes a microphone input, with optional 48V/5V phantom power support, feeding directly into a DSP mixer, offering the complete presentation solution.
When paired with the PUV-2600RX (Not Included), up to 3 switchable USB 2.0 host (Type-B) connections are available (2 on the Transmitter, 1 on the Receiver) which connect to up to 6 USB 2.0 (Type-A) device ports (3 on the Transmitter, 3 on the Receiver) for a multi-source, bidirectional, and highly flexible KVM configuration or interactive displays (Note: Only 1 USB host may be active at a time). This Transmitter also provides an interface for a remote control keypad, or trigger interface, which can be easily installed within a lectern or table in a conference room or classroom.
The EL-2600V can be powered locally using a standard power supply (optional ADP-063-SWA not included), or it can be powered by 48V PoH (Power over HDBaseT) provided by the PUV-2600RX (not Included), allowing for greater flexibility within different installation scenarios. This unit is controllable via front panel controls, WebGUI, Telnet, Triggers, and RS-232
Features:
- HDMI and DisplayPort with 18Gbps (600MHz), 3D & 4K video support; HDBaseT 2.0 compatible
- HDCP 1.x & 2.2 compliant
- Selectable HDMI, DisplayPort, and VGA inputs
- HDMI and DisplayPort support input resolutions up to 4K@60Hz (4:4:4, 8-bit)
- VGA supports input resolutions up to 1080p/WUXGA (RB)
- HDMI output supports resolutions up to 4K@60Hz (4:4:4, 8-bit)
- HDBaseT output supports resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit) with automatic color space conversion of 4K@60Hz (4:4:4, 8-bit) sources
- 4×2 matrix switching (HDMI and HDBaseT outputs are independent)
- Supported HDBaseT features: HD video and audio, 100BaseT Ethernet, 48V PoH, and control (bidirectional IR/RS-232/USB pass-through)
- Supports pass-through of LPCM 2.0/5.1/7.1, Bitstream & HD Bitstream audio formats
- Balanced analogue stereo audio breakout
- Microphone input supports optional 48V/5V phantom power
- Microphone input feeds into a DSP mixer allowing adjustable mix level controls
- Flexible USB host selection using front panel buttons
- Multiple USB hosts may be connected at once (up to 3 total, between the Tx and a compatible Rx unit) with a single selected host active at a time
- Supports extended keypad (trigger) control for easy, single button, macro activation (optional equipment required)
- Supports local power, or power via 48V PoH from Receiver (Not Included) to Transmitter (compatible Receivers only)
- Controllable via front panel buttons, WebGUI, Telnet, Triggers, and RS-232
Specifications:
Inputs
- 2x HDMI [2x HDMI Uncompressed AV and Data]
- 1x Display Port [1x Display Port Uncompressed AV]
- 1x 15pin Dsub [1x VGA RGBHV]
- 2x 3.5mm Stereo mini-jack [2x Analogue Stereo(L/R)]
- 1x Phoenix (10 pin) [1x Trigger In (8)]
- 1x RJ45 [1x LAN Serving]
- 2x USB Type B [2x Propriety Data]
- 1x 3.5mm Stereo mini-jack [1x RS-232]
- 1x Phoenix (3 pin) [1x RS-232]
- 1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
- 1x 6.35mm Stereo Jack [1x Microphone]
Outputs
- 1x HDMI [1x HDMI Uncompressed AV and Data]
- 1x RJ45 [1x HDBaseT2 HDMI & Propriety Data]
- 1x Phoenix (5 pin) [1x Analogue Stereo (Balanced or Unbalanced)]
- 1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
- 3x USB Type A [3x Propriety Data]
POE PSU:
PSU:
Dimensions
- 158mm [W] x 231mm [D] x 44mm [H]
Net Weight
Gross Weight
Huomioi, että kuva on suuntaa-antava ja varsinainen tuote saattaa ulkoasultaan poiketa tuotekuvasta (esim. tietokoneisiin ei välttämättä sisälly näyttöä, vaikka kuvassa sellainen olisikin). Jos tuotenimikkeessä on eri tiedot kuin tuotekuvauksessa, tuotenimikkeen tieto on oikein. Jos jokin asia jää epäselväksi, lähetä sähköpostia tukeen ennen tuotteen tilaamista.